يحتوي الملف المرفق على وصف أجهزة التدقيق العامة التي يمكن من خلالها إجراء دراسات تفصيلية.
For the provided excel sheet, it contains two sheets of energy bills. Do your analysis and write inside the sheet your conclusions and understanding.
Note: you are allowed to work as groups (two students per group only).
In this assignment, you will work individually. You have an excel sheet that includes the factory electric bills, loads list, instantaneous measures, power analyzer recorded data, and all loggers recorded data.
You should develop two new sheets that are:
1. energy bills analysis.
2. load balance.
Please note that you must elaborate in your sheet how you worked on the analyzer and loggers data. Also, you have to clearly state any used assumption in the calculations.
This exam will start at 13:30, on 15/03/2024. The exam total weight equals 30%. It consists of 13 different types of questions, including True/Fale, multiple choice, numeric questions (fill in the right answer), and descriptive questions (where you need to write your answers in clear english language).
Exam total time equals to 60 minutes, no time extension will be offered!!
Good luck and make sure to UNDERSTAND all of our lectures discussed concepts.
Note: you have 3 question with 4 marks each, and 2 questions with 5 marks each. So, put your efforts on it (22 marks as total)!!
Another note: For each f the above mentioned 5 questions, you MUST upload the question solution seperately. Do NOT upload one paper for many questions answers. If you Don't want to upload, you can write and save your answer for each question SEPERATELY. Again, Do NOT submitt one paper contain more than one question solution.
Each group should submit one folder only, that contains two separate files, that are technical and financial offers.
This is your final exam in energy management. Please make sure that you understand all the concepts and theory. You will have all kind of questions. Inlcuding T/F, MCQ, and quantitiative and qualititative short answrs.
Note: the exam is designed with strict time, it is enough, but strict. You will not have enough time to study, contact your colleagues, or wait them to send you answers. So, BE CAREFUL and use you time wisely.
Good Luck
This lecture is about the required equipment for conducting an energy audit. It also describes the general requirements for establishing an energy auditing company.
Second lecture is about preparing your self to execute your first site visits, what type of information you need to collect, and how to manage this step properly.
This lecture continues explaining the skills of bills analysis and understanding.
This lecture continues on explaining how to understand different patterns on annual bills, it also suggests different tips to include suitable plots in your audit report.
this lecture discussed generally the market job opportunities, and how to be ready for applying to future job applications. Moreover, the session included introduction to coursera platform and how to get benefits from it.
This lecture introduced the mapping tool (energy balance suggested analysis tool), and real data from previous energy audit.
The lecture presented data from a real case study, that is a cartoon company. It focused on explaining the factory processes flowchart, layout, and boiler auditing.
This lecture demonstrated the power analyzer and current logger data exploration and analysis.
This session discussed the case of concrete bricks factory.
This lecture continued on the brick factory case study. It included an analysis of the current logger data and how to deal with it.
In this session, we introduced the marble and stone factory operations.
This session explained the marble and stone factory energy balance assignment.
In this session, insulating materials chapter was explained.
This session continued on explaining the insulation saving opportunities. Specifically, it talked about saving in pipelines and double jacketed tanks and pipes.
Please note that due to internet connection problems, this session is divided into two parts. In this session, we continued working on insulation materials saving opportunities.
This is the second part of session 16. We continued working on systems insulation opportunities.
In this session, we continued working on insulation chapter material and we finished it.
in this lecture, we started the building envelope chapter.
In this session, we continued studying the building envelope chapter by introducing the CDD and HDD calculation procedure, concept of BLC, its importance, and how to calculate it.
This lecture included how to calculate and explain BLC using excel.
In this lecture, we discussed real energy audit reports contents and structure.
In this lecture, we talked about the ToR components and how to start reading it.
In this lecture, we continued explaining the ToR components.
In this lecture we explained how to estimate the consultancy assignment costs.
We continued on ToR understanding and how to estimate the project budget.
We discussed quickly a previously written technical proposal.
It is a training lecture on how to write the methodology.
In this lecture, we talked about the final exam.
we discussed some insulation questions and made some general discussion.